|
|
 |
| |
|
|
|
 |
 |
 |
 |
| |
|
 |
FM Adhesive: Squeegee Grade - VOC Squeegee Grade - HVMA
Cold adhesive is used in lieu of base asphalt. this product is a high strengh SBS modified bitumen adhesive that provides excellent adhesion and elongation properties. It is also used to adhere SOPREMA membranes to acceptable horizontal substrates and to each other.
Uses:
- Cold adhesive membrane for application in the horizontal field of the roof.
|
| |
|
 |
FM Adhesive Flashing Cement: Trowel Grade - VOC Trowel Grade - HVFA
FM Adhesive Trowel Grade Flashing Cements are ready-to-use bitumen-based cold adhesives that contain a bituminous binder with sticking agents and solvents.
"VOC" indicates that it contains a low solvent content.
HVFA is a ready-to-use urethane asphaltic moisture cured flashing membrane cold adhesive with low solvent content. When using HVFA, all seams are either hot air welded or heat welded.
Uses:
- Adhere flashing membranes.
- Adhere field membranes.
- As mastice to set drain leads, penetration pockets, pipe flanges amd gravel stops.
- Patch repair.
|
| |
|
 |
HVIA - II (High Velocity Insulation Adhesive II)
HVIA-II is single component, elastomeric, moisture cured, low rise urethane foam adhesive that contains no solvents.
Uses:
- To adhere approved thermal roof insulation and cover boards to acceptable substrates:
SOPRABOARD, Vapor retarders, Gypsum Board (special facers), Perlite, Polustyrene, High-Density Wood Fiberboard.
|
| |
|
 |
HVIA - III (High Velocity Insulation Adhesive III)
HVIA-III is a highly elastomeric, one-step (two-part), VOC compliant, all-purpose foaming adhesive that contains no solvents and sets in minutes.
Uses:
- To adhere approved thermal roof insulation and cover boards to acceptable substrates:
SOPRABOARD, Vapor retarders, Gypsum Board (special facers), Perlite, Polustyrene, High-Density Wood Fiberboard.
|
|
|
|